HikRobot CameraLink - Set Hue and Saturation; Aoi

CameraLink Line Scan Camera·User Manual
52
Figure 9-19 Set Color Transformation Control
9.11 Set Hue and Saturation
Hue and saturation are only available for color cameras.
 Hue
Adjusting the hue shifts the colors of the image.
Click Color Transformation Control > Hue Enable, enable Hue Enable, enter Hue according to
actual demands, and its range is from 0 to 255.
Figure 9-20 Set Hue
 Saturation
Adjusting the saturation changes the colorfulness of the colors. A higher saturation, for example,
makes colors easier to distinguish.
Click Color Transformation Control > Saturation Enable, enable Saturation Enable, enter
Saturation according to actual demands, and its range is from 0 to 255.
Figure 9-21 Set Saturation
9.12 AOI