CameraLink Line Scan Camera·User Manual
6
Hot swap is not allowed for CameraLink cable.
The camera interface for connecting CameraLink cable is SDR interface, and frame grabber
interface is different for different models. Select applicable Cameralink cable according to
camera interface and frame grabber model.
For different frame grabbers, their wirings may be different. The principle is that the
CameraLink1 (CL1) interface and CameraLink2 (CL2) interface of camera should connect to the
first and second interface of frame grabber respectively.
Steps:
1. Fix the camera to the installation position.
2. Install the lens to the camera body.
3. Connect the camera to CameraLink frame grabber via CameraLink cable.
4. Connect the camera to a suitable power adapter via 12-pin power and I/O cable.
5. Insert power adapter into power outlet.
To Next Page
Loading...
