Name: HIKVISION 7604NI-K1B
Brand: HIKVISION
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Network Video Recorder User Manual

1.1.4 DS-7600NI Series

Figure 1-6 DS-7600NI Series

Table 1-4 Panel Description

1.2 IR Remote Control Operations

The NVR may also be controlled with the included IR remote control, shown in Figure 1-7.

Batteries (2×AAA) must be installed before operation.

The IR Remote is set at the factory to control the NVR (using default Device ID# 255) without any

additional steps. Device ID# 255 is the default universal device identification number shared by the

NVRs. You may also pair an IR Remote to a specific NVR by changing the Device ID#, as follows:

Pairing (Enabling) the IR Remote to a Specific NVR (optional)

You can pair an IR Remote to a specific Hikvision NVR by creating a user-defined Device ID#. This

feature is useful when using multiple IR Remotes and NVRs.

On the NVR:

Step 1 Go to General > More Settings.

Step 2 Type a number (255 digits maximum) into the Device No. field.

Step 3 On the IR Remote:

No.

Name

Connections

POWER

Turns green when NVR is powered up.

HDD

Flickers red when data is being read from or written to HDD.

Tx/Rx

Flickers blue when network connection is functioning

properly.

USB Interface

Universal Serial Bus (USB) port for additional devices such as

USB mouse and USB Hard Disk Drive (HDD).

Other manuals for HIKVISION 7604NI-K1B

Questions and Answers:

Need help?

Do you have a question about the HIKVISION 7604NI-K1B and is the answer not in the manual?

General