HIKVISION AX DS-PWA32-HG User Manual

Figure 1-3 Funcon Buon
Use the funcon buon to add wireless devices and check the RF signal.
While the control panel is not in the
conguraon mode, press the funcon buon on the side of
the control panel once and trigger a peripheral device.
While the control panel is not in the
conguraon mode, double press the funcon buon, and
you can check the RF signal strength on the peripheral device.
Result
RSSI Acon
Strong Over 160 OK to install
Medium 80 to 160 OK to install
Weak 0 to 79 Please see the note below.
Invalid - Not OK to install
Note
Only install peripherals when the signal strength is 100 or above. For much beer system, install at
120 and above.
AX Security Control Panel
8

HIKVISION AX DS-PWA32-HG Specifications

General

Brand	HIKVISION
Model	AX DS-PWA32-HG
Category	Control Panel
Language	English