4.3.7 System Sengs
Authority Management
Set the authority opons.
Click System → System Opons to enter the System Opon Management page.
Wireless Device Poll Check
If the opon is enabled, the system will detect all radio peripherals heartbeat. If no peripherals
heartbeat is detected, the system will upload an event.
Note
For EN, do not switch to OFF.
Control Panel Arming with Fault
If the opon is enabled and there are acve faults in a zone, the zone will be bypassed
automacally when arming.
Note
You should disable the arming funcon in the Advanced Sengs page. Or the control panel
arming with fault funcon cannot be valid.
Control Panel Status Nocaon
If the opon is enabled, the device will upload report automacally when the control panel
status is changed.
Disable Funcon Key
If the
opon is enabled, all funcon keys will be disabled.
Voice Prompt
If the opon is enabled, the control panel will enable the text voice prompt.
Voice Prompt of Disarming and Alarm Clearing
If the opon is enabled, the control panel will broadcast all system faults before disarming and
alarm clearing. Before enable this funcon, you need to enable Voice Prompt.
System Volume
The available system volume range is from 0 to 10.
Authority Advanced
Sengs
Set advanced authority parameters.
Click System → System Opons → Advanced Sengs to enter the Advanced Sengs page.
AX Security Control Panel
52