HIKVISION AX DS-PWA32-HG User Manual

If you select Timeout Zone, you should select a meout value or tap Custom to set a custom
value.
Zone Bypass
Enable the funcon and the zone will be bypassed. No alarm will be received while the zone
is bypassed.
Link Camera
You can link the zone to cameras. When an alarm is triggered, you can monitor the zone via
the linked cameras.
Stay/Away
If this
opon is Enabled the zone will be auto bypassed when the alarm system is stay armed.
To re-enable the zone deselect the opon.
Chime
Enable the funcon and the zone will be start audible alarm when it is triggered.
Enable Silent Zone
Enable the funcon and no siren will be triggered if an event or alarm occurs.
4.4.12 Set Arming/Disarming Schedule
Set the arming/disarming schedule to arm/disarm a parcular zone automacally.
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the control panel page.
Tap
→ Paron Management and select a paron, or tap on the Parion page to enter the
Sengs page.
Enable the auto arm/disarm funcon and set the auto arm me/auto disarm me. You can also set
the late to disarm
me, entry delay me, exit delay me, siren delay me, weekend excepon and
excepted holiday.
AX Security Control Panel
72

HIKVISION AX DS-PWA32-HG Specifications

General

Brand	HIKVISION
Model	AX DS-PWA32-HG
Category	Control Panel
Language	English