HIKVISION AX DS-PWA32-HG User Manual

Figure 4-37 Add User
4. Select User Type. Enter User Name and Password.
5. Enter Keypad Password.
Note
The keypad password +1 or -1 is the duress code. Use the duress code can operate the keyboard
to arm and disarm normally and upload a duress alarm. For example, if the keypad password is
123456, the duress code is 123455 or 123457.
6. Tap Add to add the user.
7.
Oponal: Tap a user to edit the parameters. You can choose to enable the user or not. Select
the linked paron and the permission.
8.
Oponal: Tap a user and tap Delete to delete the user.
Note
Admin, installer and mabufacturer can not be deleted.
4.4.8 System Sengs
System Opon
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the control panel page.
Tap → System Opon to set parameters.
For
Opon Management:
AX Security Control Panel
65

HIKVISION AX DS-PWA32-HG Specifications

General

Brand	HIKVISION
Model	AX DS-PWA32-HG
Category	Control Panel
Language	English