HIKVISION AX DS-PWA32-HG User Manual

Connect Locally
Note
Add the card or keyfob via the web client before adding peripheral device for clearing tampering
alarm.
The distance between the control panel and wireless device should be less than 50 cm.
While the control panel is not in the registraon mode, press the funcon buon on the side of the
control panel once and trigger a peripheral device.
Connect via Client Soware
Add a control panel to the client soware.
In the client soware, click Device Management → → Wireless Device . Select a zone/relay/
siren and enter the
Sengs page. Input the device serial No. for connecon.
Note
For details, refer to the chapter of Conguraon-Congure via Web Client-Alarm Sengs.
Connect via Web Client
In the web client, click Wireless Device . Select a zone/relay/siren and enter the Sengs page.
Input the device serial No. for connecon.
Note
For details, refer to the chapter of Conguraon-Congure via Web Client-Alarm Sengs.
Connect via Mobile Client
Add a control panel to the mobile client.
On the control panel sengs page, Click +, scan the QR code on the wireless device or enter the
serial No. of the device.
Note
For details, refer to the chapter ofConguraon-Conguraon via Mobile Client-Add Peripheral to
the Control Panel.
AX Security Control Panel
10

HIKVISION AX DS-PWA32-HG Specifications

General

Brand	HIKVISION
Model	AX DS-PWA32-HG
Category	Control Panel
Language	English