Note
The keypad password +1 or -1 is the duress code. Use the duress code can operate the keyboard
to arm and disarm normally and upload a duress alarm. For example, if the keypad password is
123456, the duress code is 123455 or 123457
6. Check
parons
7. Check the check boxes to set the user permission.
The user can only operate the assigned permissions.
8.
Click OK.
9.
Oponal: Enable the user in the Enable User column to allow the enabled user operang the
device.
10.
Oponal: Select an user and click Edit and you can edit the user's informaon and permission.
11.
Oponal: Delete a single user or check mulple users and click Delete to delete users in batch.
Note
The admin, the installer and the manufacture cannot be deleted.
Add/Edit/Delete Keyfob
You can add keyfob to the security control panel and you can control the security control panel via
the keyfob. You can also edit the keyfob informaon or delete the keyfob from the security control
panel.
Steps
1. Click User Management → Keyfob to enter the Keyfob Management page.
AX Security Control Panel
48
To Next Page
Loading...
Need help?
General
