HIKVISION AX PRO User Manual

89
Figure 5-18. Sounder Settings
Linked Area
Only enabled areas will be listed.
The newly added peripheral is linked to area 1 by default.
Alarm Volume
The available alarm volume range is from 0 to 3 (function varies according to the model of
device).
Alarm Strobe Flash
Enable alarm strobe light.
Alarm Duration
The available alarm duration range is from 10 to 900 s.
Alarm Buzzer
Enable alarm buzzer.
Lid Open When Disarmed
When the linked area is disarmed, there is a lid opened alarm triggered by a peripheral, and
the sounder will also be triggered.
Arm/Disarm Indicator
Enable arm/disarm LED indicator.
Arm/Disarm Buzzer
Enable arm/disarm buzzer.
Buzzer Indicator on Delay Zone
When the area entry delay or exit delay, in addition to the control panel, the sounder will also
give an alarm.
Polling Rate
Sets the interval at which the system requires the device to return a report. If the device

HIKVISION AX PRO Specifications

General

Two-Way Wireless Communication	Yes
Maximum Number of Wireless Repeaters	4
Maximum Number of IP Cameras	4
Voice Prompt	Yes
Tag Reader	Yes
Mobile App	Hik-Connect
Type	Wireless Alarm System
Network	Ethernet, Wi-Fi
Backup Battery	Yes
Onboard Siren	Yes
Operating Temperature	-10 °C to 50 °C
Compatibility	Hikvision