HIKVISION DS-2AE7232TI-A

HD-TVI Speed Dome·Quick Start Guide
9
 Terminal Resistor Settings
The No. 8 of SW2 switches is used for turning on/off the 120Ω terminal resistor.
Table 1-16 Set Terminal Resistor
Terminal Matching Resistance
8
Turn on the Resistor
ON
Turn off the Resistor
OFF
The o-ring in the groove of the switch cover is for waterproof.
1.2.4 Mini Speed Dome Settings
 DIP Switch Location of Mini Analog Speed Dome
DIP Switch
Figure 1-10 DIP Switch of Mini Analog Speed Dome
 Setting DIP Switch
1 75 6432 8 9 10
ON DIP
1 2
ON
Figure 1-11 Enlarged View of DIP Switch
Table 1-17 Switch Functions
Switch No.
Function
1 to 5 (SW1)
Set the address for the speed dome
6, 7 (SW1)
Set the baudrate for the speed dome
8, 9 (SW1)
Set the protocol for the speed dome
10 (SW1)
Set the TVI mode for the speed dome
1, 2 (SW2)
Set the terminal resistor for the speed dome