HIKVISION DS-2CD2063G0-I User Manual

Network Bullet Camera·Quick Start Guide
14
Description
No.
Description
No.
Description
1
Mounting Base
7
Memory Card Slot
2
Back Case
8
Power Supply Interface
3
Sun Shield
9
10/100M Self-adaptive
Ethernet Interface
4
Lens
10
PoE Cable
5
Adjusting Nut
11
GND Screw
6
WPS/RESET Button
Note:
 This type of bullet camera supports PoE power supply. You can
power the camera by connecting both DC 12V interface and the
Ethernet interface. Or you can connect the Ethernet interface only.
 WPS/RESET Button
WPS function and Reset function share the same button. The
button works as a reset button only when you press it when the
camera is powered on.
Resetting the Camera
Press WPS/RESET button about 10s when the camera is power on or
rebooting to restore the default settings, including the user name,
password, IP address, port No., etc.

HIKVISION DS-2CD2063G0-I Specifications

General

Brand	HIKVISION
Model	DS-2CD2063G0-I
Category	Security Camera
Language	English