HIKVISION DS-2CD2063G0-I User Manual

Network Bullet Camera·Quick Start Guide
23
1). Loosen the adjusting nut.
2). Adjust the pan direction [0° to 360°].
3). Adjust the tilt direction [0° to 90°].
4). Rotate the camera [0° to 360°] to adjust the lens to the desired
viewing angle.
5). Tighten the adjusting nut to complete the installation.
Waterproof Measures
If the camera is installed outdoor, you should use the waterproof
accessory or tapes to waterproof the cables. Otherwise the cables
might get wet or a short circuit occurs.
2.3.1 Install Network Cable Waterproof Jacket
⑥
④
②
③
①
④
⑤
⑥
③
①
Align
Figure 2-6 Install Waterproof Jacket
Steps:
1. Feed the network cable through ① and ③ in order.

HIKVISION DS-2CD2063G0-I Specifications

General

Brand	HIKVISION
Model	DS-2CD2063G0-I
Category	Security Camera
Language	English