HIKVISION DS-2CD2063G0-I User Manual

Network Bullet Camera·Quick Start Guide
15
WPS/RESET
WPS/RESET Button
Setting the WPS Protocol
A wireless router with the WPS function is required to enable the
WPS function of the camera.
Steps:
1. Enable the WPS function of your router. Refer to the operation
guide of your router for detailed procedures.
2. Press the WPS/RESET button (about 2s) on the camera to join in
the wireless network.

HIKVISION DS-2CD2063G0-I Specifications

General

Brand	HIKVISION
Model	DS-2CD2063G0-I
Category	Security Camera
Language	English