HIKVISION DS-2CD2412F-I - Page 7

Network Camera·Quick Operation Guide
6
6
No.
Description
Status: Reserved
Link:
Flashing amber when network
connection is functioning properly;
Unlit when no network connection;
5
Infrared Light
6
SD Card Slot
7
10M / 100M self-adaptive Ethernet interface & PoE
8
WPS (Wi-Fi Protected Setup)/Reset Button
9
Alarm Input Interface
10
Ground
11
Alarm Output Interface
12
Power supply interface; (DC 12V)
 To reset the default parameters to the camera, you need to
press and hold the RESET button and power on the camera.
After the power on of the camera, you must still press and hold
the Reset button for about 10 seconds.
 The WPS button is an easy configuration protocol of Wi-Fi
settings. Press the WPS button on the camera and press the