You can click or on each column heading to order
the information; you can click to show the device
table and hide the network parameter panel on the right
side, or click to show the network parameter panel.
Modify device information
Steps:
1). Select the device to be modified in the device list as shown
in Figure 4-3. The network parameters of the device will be
displayed in the Modify Network Parameters panel on the
right side as shown in Figure 4-4.
2). Edit the modifiable network parameters, e.g. IP address
and port number.
3). Enter the password of the admin account of the device in
the Password field and click to save the
changes.
Figure 4-3 Select a device
To Next Page
Loading...
