EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD2532F-I

HIKVISION DS-2CD2532F-I User Manual

HIKVISION DS-2CD2532F-I
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
User Manual of Network Camera
3
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are
neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
Please adopt the power adapter which can meet the safety extra low voltage
(SELV) standard. And source with 12 VDC or 24 VAC (depending on models)
according to the IEC60950-1 and Limited Power Source standard.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
To reduce the risk of fire or electrical shock, do not expose this product to rain or
moisture.
This installation should be made by a qualified service person and should conform
to all the local codes.
Please install blackouts equipment into the power supply circuit for convenient
supply interruption.
Please make sure that the ceiling can support more than 50(N) Newton gravities if
the camera is fixed to the ceiling.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD2532F-I and is the answer not in the manual?

HIKVISION DS-2CD2532F-I Specifications

General IconGeneral
TypeIP security camera
Placement supportedOutdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
Form factorDome
Mounting typeCeiling
Product colorWhite
International Protection (IP) codeIP66
Total megapixels3 MP
Maximum resolution2048 x 1536 pixels
Supported video modes1080p
Image quality adjustmentBrightness, Contrast, Saturation
Video compression formatsH.264, M-JPEG
Supported graphics resolutions1920 x 1080 (HD 1080), 2048 x 1536 (QXGA)
Pan range-30 - 30 °
Tilt angle range0 - 75 °
Angle of rotation360 °
Camera shutter typeElectronic
Camera shutter speed1/3 - 1/100000 s
Minimum illumination0 lx
Field of view (FOV) angle70 °
Sensor typeCMOS
Optical sensor size1/3 \
Fixed focal length- mm
Maximum aperture number2
Password protection typeUser
Built-in HDDNo
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size128 GB
LED typeIR
Night vision distance10 m
Cabling technology10/100Base-T(X)
Ethernet interface typeFast Ethernet
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Number of cameras1
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Power source typePoE
Power consumption (max)5 W
InterfaceRJ-45
Audio formats supportedG.711, G.726
Lens mount interfaceM12
Weight and Dimensions IconWeight and Dimensions
Depth96.7 mm
Width99.3 mm
Height52.8 mm
Weight600 g

Related product manuals