User Manual of Network Camera
94
Figure 10-5 Anonymous Visit
2. Set the Anonymous Visit permission Enable or Disable in the drop-down list to
enable or disable the anonymous visit.
3. Click Save to save the settings.
There will be a checkbox of Anonymous by the next time you logging in.
Figure 10-6 Login Interface with an Anonymous Checkbox
4. Check the checkbox of Anonymous and click Login.
Note: Only live view is available for the anonymous user.
10.4 IP Address Filter
Purpose:
This function makes it possible for access control.
Steps:
1. Enter the IP Address Filter interface:
Configuration> Advanced Configuration> Security > IP Address Filter
To Next Page
Loading...
