User Manual of Network Camera
78
affected by the external factors; such as the intentional rotation of the camera.
Steps:
1. Check the Enable Scene Change Detection checkbox.
Sensitivity: Range [1%-100%]. The higher the sensitivity, the easier the
change of scene can trigger the alarm.
Arming Schedule is configured to set the time you want the function to be
enabled.
2. Click Edit to set the arming schedule.
3. Choose to trigger alarm actions as Notify Surveillance Center and Send
Email, or trigger the Alarm Output.
4. Click Save to save the settings.
Figure 6-49 Scene Change Detection
To Next Page
Loading...
