User Manual of Network Fisheye Camera
62
for motion detection without considering the day / night switch.
Figure 5-40 Motion Detection Settings-Normal Mode
(1) Click the Draw Area button to start drawing.
(2) Click-and-drag the mouse on the live video to draw a motion detection area.
(3) Click Stop Drawing to finish drawing.
(4) Repeat above steps to draw other detection areas.
(5) Click-and-drag the slider to set the sensitivity of the detection.
The sensitivity value ranges from 0 to 100. And the higher the value is, the
easier the motion can be detected.
(6) You can click Clear All to clear all of the configured areas.
ļ Expert Mode
If Expert is selected as the configuration mode, different sets of parameters are
adopted for motion detection at day and night.
To Next Page
Loading...
