EasyManuals Logo

HIKVISION DS-2CD7153-E User Manual

HIKVISION DS-2CD7153-E
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
User Manual of Digital Video Recorder
113
Figure 9. 10 Register the Device
Laview:
Enter the Server Address and Device Domain Name for LAVIEW.
1) Enter the Server Address of the LAVIEW server, which is ns1.dvrlist.com by default.
2) Enter the Device Domain Name. You can use the alias you registered in the LAVIEW server
or define a new device domain name. If a new alias of the device domain name is defined in
the NVR, it will replace the old one registered on the server. You can register the alias of the
device domain name in the LAVIEW server first and then enter the alias to the Device Domain
Name in the NVR; you can also enter the domain name directly on the NVR to create a new
one.
Figure 9. 11 Laview DDNS setting interface
Note: The device name can only contain the lower-case English letter, numeric and-’; and it
must start with the lower-case English letter and cannot end with ‘-’.
Access the Device via Web Browser or Client Software
After having successfully registered the device on the HiDDNS server, you can access your
device via web browser or Client Software with the Device Domain Name (Device Name).
OPTION 1: Access the Device via Web Browser
Open a web browser, and enter http://www.hiddns.com/alias in the address bar. Alias refers to
the Device Domain Name on the device or the Device Name on the HiDDNS server.
Example: http://www.hiddns.com/dvr
Note: If you mapped the HTTP port on your router and changed it to port No. except 80, you
have to enter http://www.hiddns.com/alias:HTTP port in the address bar to access the device.
You can refer to Chapter 9.2.5 Configuring NAT for the mapped HTTP port No.
OPTION 2: Access the devices via NVMS7000
For NVMS7000, in the Add Device window, select and then edit the device
information.
Nickname: Edit a name for the device as you want.
Server Address: www.hiddns.com
Device Domain Name: It refers to the Device Domain Name on the device or the Device
Name on the HiDDNS server you created.
User Name: Enter the user name of the device. By default it is admin.

Table of Contents

Other manuals for HIKVISION DS-2CD7153-E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD7153-E and is the answer not in the manual?

HIKVISION DS-2CD7153-E Specifications

General IconGeneral
TypeIP security camera
PTZ control-
Day/night modeYes
Placement supportedOutdoor
Connectivity technologyWired
Form factorDome
Product colorWhite
Protection featuresVandal proof
International Protection (IP) codeIP66
Total megapixels2 MP
Maximum resolution1600 x 1200 pixels
Supported video modes720p
Video formats supportedH.264, M-JPEG, MPEG4
Supported graphics resolutions1280 x 960, 1280 x 720 (HD 720), 1600 x 1200 (UXGA)
Pan range-15 - 15 °
Tilt angle range0 - 90 °
Angle of rotation15 °
Camera shutter speed1/25 - 1/100000 s
Minimum illumination0.1 lx
Field of view (FOV) angle68 °
Sensor typeCMOS
Optical sensor size1/3 \
Optical zoom- x
Focus adjustment1.8
Fixed focal length2.8 mm
Password protection typeUser
Wi-FiNo
Cabling technology10/100Base-T(X)
Supported network protocolsTCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP, 802.1x, Qos (SIP, SRTP
Ethernet LAN (RJ-45) ports1
DC output voltage+12V
Power source typePoE
Power consumption (max)4 W
Weight and Dimensions IconWeight and Dimensions
Depth97.5 mm
Width99.9 mm
Height46.5 mm
Weight250 g

Related product manuals