HIKVISION DS-2CD852MF-E Installation Manual

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
29
Step 3: While viewing the video on the computer, adjust the camera’s view angle for your need.
Figure 3.5.4
Figure 3.5.5
Figure 3.5.6
Loosen the lens set
screws.
Insert the hexagonal
screw driver into the hole
marked in the picture ,
and then adjust horizontally
and vertically the camera’s pan
and tilt by turning the
hexagonal screw driver.
Tighten the lens set
screws.

HIKVISION DS-2CD852MF-E Specifications

General

Brand	HIKVISION
Model	DS-2CD852MF-E
Category	Security Camera
Language	English