HIKVISION DS-2CD852MF-E

To Next Page

To Previous Page

Installation Manual of Network Camera

Note:

1. As the lens of camera has already been factory adjusted to the best imaging effect, thus it only

needs to adjust the pan and tilt view angle.

2. If the image is not clear without the back box, please don’t worry, the back box will affect the

imaging effect, so when you test the imaging effect of lens, the back box must be installed to the

camera

Step 4: Install the back box, and tighten the set screws.

Figure 3.5.7 Install the back box

Figure 3.5.8 Done

Other manuals for HIKVISION DS-2CD852MF-E