AWC>PUSH: White balance is continuously being
adjusted in real-time according to the color temperature of
the scene illumination in AWC>PUSH mode.
Manual: Change the Red value and the Blue value to
manually set the white balance. Set the WB Mode to Manual,
and then enter the Manual Menu to set the value for M.WB
R and M.WB B, see Figure 3-10.
Figure 3-10 Manual Mode of WB
R-Y GAIN
Adjust the red gain. You can set the value for R-Y GAIN from
0 to 255.
B-Y GAIN
Adjust the blue gain. You can set the value for B-Y GAIN
from 0 to 255.
3.4 Day & Night
Purpose: