HIKVISION DS-2CE1582P-VFIR3 - Function

High-definition IR Water-proof Bullet Camera· User Manual
26
26
EX-CDS
BURST ON
DAY>NIGHT 151---|-----
NIGHT>DAY 100---|------
SMART IR AUTO
DWELL TIME 003---|-----
RETURN↓
Figure 3-13 EX-CDS
Note: D&N will not be triggered by the external CDS since this
series of cameras do not have alarm output, while the SMART IR
function is still configurable from here.
 C_SUP
C_SUP is mainly used to set the inverse level of the color
noise in Night Mode. You can set the C_SUP value from 0 to
100.
 A_SUP
A_SUP is mainly used for setting the inverse level of the
sharpness noise in Night mode. You can set the A_SUP
value from 0 to 100.
3.5 Function
Purpose:
You can configure the parameters for MIRROR, SHARPNESS,
MONITOR, GAMMA, LSC function from the Function Menu.
See Figure 3-14.