DISPLAY
You can set the Display to OFF, ICON, or TRACE. Icon
means it will be displayed as an icon when the motion
detection occurs, and it will be displayed as mosaic if you
select trace.
HOLD TIME
It means the delay time set for motion detection. You can
set the Hold Time from 3s to 15s.
ALARM
Turing on the Alarm means it will support the alarm output.
You can turn the Alarm ON or OFF.
Note: There is no alarm output interface for this series of
camera, so the Alarm will not function at the present.
3.7 Privacy
Purpose:
To Next Page
Loading...
