AUTOx96, AUTOx128, AUTOx256, 1/50, 1/120, 1/250, 1/500,
1/1K, 1/2K, 1/4K, 1/10K.
AUTO, AUTOx2, AUTOx4, AUTOx6, AUTOx8, AUTOx12,
AUTOx16, AUTOx24, AUTOx32, AUTOx48, AUTOx64, AUTOx96,
AUTOx128, AUTOx256 values are called slow shutter values.
When the IRIS value is ELC, the SHUTTER value is not
adjustable.
Steps:
1. Press the up/down buttons to move the cursor to SHUTTER,
press the left/right buttons to select one shutter value you
need.
2. Move the cursor to EXIT, press left/right buttons to choose
SAVE, press the menu button to save the settings.
3.2.6 AGC Setting (Auto Gain Control)
In low-light conditions, the camera balances the AGC value and
the SHUTTER value to enhance the brightness of the image.
When the IRIS value is ALC or MANUAL… and the SHUTTER
value is slow shutter value, the AGC menu will switch to MOVE
menu. The MOVE menu can be set to NORM, FAST, FASTER,
SLOWER, SLOW.
When the SHUTTER value is slow shutter value, you can set
the MOVE values according to the speed of the moving objects
in the scene. This can reduce the streaking of the fast moving
objects.
If the speed of the moving objects is low, you can choose
SLOWER and SLOW.
To Next Page
Loading...
Need help?
General
