DNR (Digital Noise Reduction) function can reduce the noise in the
image. The reduce value can be set to 1, 2, 3, 4, 5 and OFF.
MIRROR
If you turn the MIRROR function on, the image will be flipped. It is
like the image in the mirror. The flip direction can be set to OFF,
HORIZONTAL, CENTRAL and VERTICAL.
EXPOSURE
This function can enhance the brightness of the image. The value
ranges from 0 to 15.
DEFINITION
DEFINITION describes the clarity of detail in the image. The
value ranges from 0 to 15.
CONTRAST
This feature enhances the difference in color and light between
parts of an image. The value ranges from 0 to 7.
CHROMA
Adjust this feature to change the depth of the color. The value
ranges from 0 to 7.
POS/NEG
The default setting of the POS/NEG is +. It means the image is
positive. If you select -, you can see the image turn to positive.
EIS
Turning the EIS (Electronic Image Stabilization) function on may
reduce the image vibration caused by external environment.
SUPPRESS
To Next Page
Loading...
