© Hikvision
You can enable or disable the WDR function as shown in Figure 6-32.
Figure 6-32 WDR
HLC
HLC (High Light Compensation) makes the camera identify and suppress the strong light sources
that usually flare across a scene. This makes it possible to see the detail of the image that would
normally be hidden.
White Balance
The White Balance mode can be set to Auto, MWB, Outdoor, Indoor, Fluorescent Lamp, Sodium
Lamp, and ATW.
Auto
In Auto mode, the camera retains color balance automatically according to the current color
temperature.
Manual White Balance:
In MWB mode, you can adjust the color temperature manually to meet your own demand as
shown in Figure 6-33.
Figure 6-33 Manual White Balance
Outdoor
You can select this mode when the zoom camera is installed in outdoor environment.
Indoor
You can select this mode when the zoom camera is installed in indoor environment.
Fluorescent Lamp
You can select this mode when there are fluorescent lamps installed near the zoom camera.
Sodium Lamp
You can select this mode when there are sodium lamps installed near the zoom camera.
ATW
In ATW mode, white balance is continuously being adjusted in real-time according to the color
temperature of the scene illumination.
Image Enhancement
Note:
The functions vary depending on different camera models.
3D Digital Noise Reduction
You can set Digital Noise Reduction function to Normal and adjust the Noise Reduction Level as
To Next Page
Loading...
Need help?
General
