HIKVISION DS-2DE5425IWG-4G - Page 41

Day/Night Switch
Day/Night Switch funcon can provide color images in the day mode and black/white images in the
night mode. Switch mode is
congurable.
Day
The image is always in color.
Night
The image is always black/white
Auto
The camera switches between the day mode and the night mode according to the
illuminaon
automacally.
Scheduled-Switch
Set the Start Time and the End Time to dene the duraon for day mode.
Note
Day/Night Switch funcon varies according to models.
Set Supplement Light
Steps
1.
Go to Conguraon → Maintenance → System Service .
2.
Check Enable Supplement Light.
3.
Click Save.
4.
Go to
Conguraon → Image → Display Sengs → Day/Night Switch to set supplement light
parameters.
Smart Supplement Light
This feature uses smart image processing technology to reduce overexposure caused by
supplement light.
Supplememt Light Mode
When the mode is set to Auto, the supplement light is
automacally turned in or o
according to the image brightness.
When the mode is set to Scheduled, set the start me and end me for the light to work.
When the mode is set to NC, the light is o.
Brightness Limit
Adjust the upper limit of supplement light power.
Network Speed Dome User Manual
29