HIKVISION DS-2DE5425IWG-4G - Chapter 10 System and Security; 10.3 Upgrade; 10.4 Restore and Default

Chapter 10 System and Security
It introduces system maintenance, system sengs and security management, and explains how to
congure relevant parameters.
10.1 View Device Informaon
You can view device informaon, such as Device No., Model, Serial No. and Firmware Version.
Enter Conguraon → System → System Sengs → Basic Informaon to view the device
informaon.
10.2 Restart
You can restart the device via browser.
Go to Maintenance and Security → Maintenance → Restart , and click Restart.
10.3 Upgrade
Before You Start
You need to obtain the correct upgrade package.
Cauon
DO NOT disconnect power during the process, and the device restarts automacally aer upgrade.
Steps
1.
Go to Maintenance and Security → Maintenance → Upgrade .
2.
Choose one method to upgrade.
Firmware
Locate the exact path of the upgrade le.
Firmware Directory Locate the directory which the upgrade le belongs to.
3.
Click to select the upgrade le.
4.
Click Upgrade.
10.4 Restore and Default
Restore and Default helps restore the device parameters to the default
sengs.
Steps
1.
Go to Maintenance and Security → Maintenance → Backup and Restore .
Network Speed Dome User Manual
83