HIKVISION DS-2DE5425IWG-4G - Set Unattended Baggage Detection

Figure 7-7 Draw Area
7.
Click Save.
8.
Oponal: Click Add, and repeat above steps to set other rules.
Note
Up to 4 rules can be set.
9.
Set arming schedule. See Set Arming Schedule .
10.
Set linkage method. See
Linkage Method Sengs .
7.2.8 Set
Unaended Baggage Detecon
Unaended baggage detecon is used to detect the objects le over in the predened area.
Linkage methods are triggered
aer the object is le and stays in the area for a set me period.
Before You Start
Go to VCA → Select Applicaon to select Smart Event, and click Next to enable the funcon.
Steps
1.
Go to VCA → Set
Applicaon → Smart Event → Unaended Baggage Detecon .
2.
Check Enable.
3.
Oponal: Click Lock to lock PTZ control to prevent the interrupon from other PTZ related acon
during conguraon.
Normally, the PTZ control is automacally locked when you enter the conguraon interface.
You can manually resume the lock when the countdown is over.
4.
Adjust the live image to the desired scene by using PTZ control buons.
Network Speed Dome User Manual
59