HIKVISION DS-2DF8C435MHS-DELW - Set Line Crossing Detection

2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the
buon and draw again.
7.
Set detecon parameters.
Sensivity It stands for the sensivity of detecng an target. The higher the value of
sensivity is, the more easily the target is detected.
Threshold Threshold stands for the me of the target loitering in the region. If the me
that she/he stays in the region exceeds the threshold, the alarm is triggered.
Detecon
Target
You can specify the object type, and the device only detects the selected
type of objects.
Figure 8-4 Draw Area
8.
Click Save.
9.
Repeat above steps to set other
detecon areas.
10.
Set arming schedule. See Set Arming Schedule .
11.
Set linkage method. See
Linkage Method Sengs .
8.2.3 Set Line Crossing
Detecon
Line crossing detecon is used to detect the object movement of crossing a predened line. When
it occurs, the device takes linkage
acons as response.
Steps
1.
Go to VCA → Smart Event → Line Crossing Detecon .
2.
Check Enable.
Network Speed Dome User Manual
65