4.2 Set Transmission Parameters
The live view image may be displayed abnormally according to the network conditions. In
different network environments, you can adjust the transmission parameters to solve the
problem.
Steps
1.
Go to
Conguration > Local > Live View Parameters .
2.
Set the transmission parameters as required.
Protocol
TCP
TCP ensures complete delivery of streaming data and better video quality, yet the
real-time transmission will be affected. It is suitable for the stable network
environment.
UDP
UDP is suitable for the unstable network environment that does not demand high
video
uency.
MULTICAST
MULTICAST is suitable for the situation that there are multiple clients. You should
set the multicast address for them before selection.
Note
For detailed information about multicast, refer to
Multicast
.
HTTP
HTTP is suitable for the situation that the third-party needs to get the stream from
the device.
Play Performance
Shortest Delay
The device takes the real-time video image as the priority over the video
uency.
Balanced
The device ensures both the real-time video image and the uency.
Fluent
The device takes the video uency as the priority over teal-time. In poor network
environment, the device cannot ensures video
uency even the uency is enabled.
Custom
Thermal & Optical Bi-spectrum Network Camera User Manual
25
To Next Page
Loading...
Need help?
General
