HIKVISION DS-2TD2667-35/PY User Manual

Line Thermography
Congure the temperature measurement rule and monitor the maximum temperature of
the line.
Steps
1.
Click and drag the mouse to draw a line in the live view interface.
2.
Click and move the line to adjust the position.
3.
Click and drag the ends of the line to adjust the length.
Go to Live View interface to view the maximum temperature and rule of the line in
thermal channel.
Area Thermography
Congure the temperature measurement rule and monitor the maximum temperature of
the area.
Steps
1.
Click and drag the mouse in the live view to draw the area and right click to
nish
drawing.
2.
Click and move the area to adjust the position.
3.
Drag the corners of the area to adjust the size and shape.
Go to Live View interface to view the maximum temperature and rule of the area in
thermal channel.
Set Temperature Measurement Shield Region
You can congure areas from being detected.
Steps
1.
Go to
Conguration > Local , and enable Display Shield Area.
2.
Check Enable Shield Area.
3.
Click .
4.
Drag the mouse in the live view to draw the area. You can drag the corners of the red
rectangle area to change its shape and size.
5.
Right click the mouse to stop drawing.
6.
Optional: Select one area and click
to delete it.
7.
Click Save.
Thermal & Optical Bi-spectrum Network Camera User Manual
61

HIKVISION DS-2TD2667-35/PY Specifications

General

Brand	HIKVISION
Model	DS-2TD2667-35/PY
Category	Security Camera
Language	English