Thermal & Optical Bi-spectrum Network Camera User Manual
viii
6.1 Set Motion Detection23
6.1.1 Normal Mode23
6.1.2 Expert Mode24
6.2 Set Video Tampering Alarm25
6.3 Set Alarm Input26
6.4 Set Exception Alarm27
6.5 Detect Audio Exception27
Chapter 7 Arming Schedule and Alarm Linkage29
7.1 Set Arming Schedule29
7.2 Linkage Method Settings29
7.2.1 Trigger Alarm Output29
7.2.1.1 Manual Alarm30
7.2.1.2 Automatic Alarm30
7.2.2 FTP/NAS/Memory Card Uploading30
7.2.3 Send Email31
7.2.3.1 Set Email31
7.2.4 Notify Surveillance Center32
7.2.5 Trigger Recording32
7.2.6 Set Audible Alarm Output32
7.2.7 Set Flashing Alarm Light Output33
Chapter 8 Live View34
8.1 Live View Parameters34
8.1.1 Window Division34
8.1.2 Live View Stream Type34
8.1.3 Enable and Disable Live View34
8.1.4 Start Digital Zoom34
8.1.5 View Previous/Next Page35
8.1.6 Full Screen35
8.1.7 Light35
8.1.8 Wiper35
8.1.9 Lens Initialization35
8.1.10 Auxiliary Focus35
8.1.11 Quick Set Live View35
8.1.12 Lens Parameters Adjustment36
8.2 Set Transmission Parameters36
Chapter 9 Video and Audio38
9.1 Video Settings38
9.1.1 Stream Type38
9.1.2 Video Type38
9.1.3 Resolution39
9.1.4 Bitrate Type and Max. Bitrate39
To Next Page
Loading...
