HIKVISION DS-2TD4166-25/V2 - Page 21

User Manual of Thermal Bi-spectrum Network Speed dome
© Hikvision
14
Figure 2-12 Accessing the Speed dome with Dynamic IP
The obtained IP address is dynamically assigned via PPPoE, so the IP address always changes
after rebooting the speed dome. To solve the inconvenience of the dynamic IP, you need to
get a domain name from the DDNS provider (E.g. DynDns.com). Please follow below steps for
normal domain name resolution and private domain name resolution to solve the problem.
 Normal Domain Name Resolution
Figure 2-13 Normal Domain Name Resolution
Steps:
1. Apply a domain name from a domain name provider.
2. Configure the DDNS settings in the DDNS Settings interface of the network speed dome.
Refer to Section 7.1.1 Configuring DDNS Settings for detailed configuration.
3. Visit the speed dome via the applied domain name.
 Private Domain Name Resolution
Figure 2-14 Private Domain Name Resolution
Steps: