HIKVISION DS-2TD4166-25/V2

User Manual of Thermal Bi-spectrum Network Speed dome
© Hikvision
26
Button
Name
Description
Iris close/open
When the image is too dark, click
to open the iris. When the
image is too bright, click to
close the iris.
Auxiliary Functions
The auxiliary functions include light,
wiper, auxiliary focus, lens
initialization, manual tracking, 3D
positioning, de-icing heater,
click-to-thermometry, synchronize
FOV
Speed Adjustment
Adjust speed of pan/tilt movements.
Preset
Refer to 4.4.5 for detailed
information of setting preset.
Patrol
Refer to 4.4.6 for detailed
information of setting patrol.
Pattern
Refer to4.4.8 for detailed
information of setting pattern.
 Buttons on the Preset/Patrol/Patterns interface:
Table 4-3 Descriptions of Buttons
Buttons
Description
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.
4.4.4 Auxiliary Functions
The Auxiliary functions panel is shown in the figure below:
Figure 4-5 Auxiliary Functions
 Light