7.2 Configuring Video and Audio Settings
7.2.1 Configuring Video Settings
Steps:
1. Enter the Video settings interface:
Configuration > Video/Audio > Video
Figure 7-22 Configure Video Settings
2. Select the Channel No. in the dropdown list you want to configure.
3. Select the Stream Type of the speed dome to main stream (normal), sub-stream or third
stream. The main stream is usually for recording and live viewing with good bandwidth, and
the sub-stream can be used for live viewing when the bandwidth is limited. Refer to the
Section 4.1 Configuring Local Parameters for switching the main stream and sub-stream for
live viewing.
4. You can customize the following parameters for the selected stream.
The parameters vary depending on the models of the speed dome.
Video Type:
Select the stream type to video stream, or video & audio composite stream. The audio signal
will be recorded only when the Video Type is Video & Audio.
Resolution:
To Next Page
Loading...
