HIKVISION DS-2TD6537T-50H4LX/W - Explosion-Proof Tube Installaion (Without Fiber)

Thermal Network Positioning System·Quick Start Guide
11
4.4 Explosion-proof Tube Installaion (without fiber)
Purpose ：
You must use the explosion-proof tube and junction box to prevent the explosive gas
from entering into the camera through the cable. Or it may cause danger.
Steps:
1. Cut all terminals of the cable.
Figure 1-6 Cut all terminals
2. Unscrew one cable gland of the explosion-proof tube, route the cable through the
tube.
3. Screw the explosion-proof tube with the thread connector of camera.
Unscrew the
Cable Gland
Screw
Figure 1-7 Explosion-proof Tube