HIKVISION DS-7104NI-Q1/M

Congure PTZ Linkage
Video recorder can trigger the PTZ acons (e.g., call preset/patrol/paern) when the alarm event,
or VCA
detecon events occur.
Steps
1. Go to Linkage
Acon interface of the alarm input or VCA detecon.
2. Select PTZ Linkage.
3. Select the camera to perform the PTZ
acons.
4. Select the preset/patrol/paern No. to call when the alarm events occur.
Figure 6-23 PTZ Linkage
Note
You can set one PTZ type only for the linkage acon each me.
6.5 Recording Management
6.5.1 Congure Recording Schedule
Video recorder will automacally start/stop recording according to the congured schedule.
Congure
Connuous Recording
Steps
1. Go to Conguraon → Record → Parameter .
2. Set the connuous main stream/sub-stream recording parameters for the camera.
3. Go to
Conguraon → Record → Schedule .
4. Select recording type as Connuous.
Congure
Event Recording
You can congure the recording triggered by the normal event or smart event.
Network Video Recorder User Manual
63