Digital Video Recorder User Manual
261
Figure 17-16 Added User Listed in User Management Interface
Step 5 You can assign permissions for the added user.
1) Select the user from the list and then click to enter the Permission Settings interface,
as shown in Figure 17-17.
Figure 17-17 User Permission Settings Interface
2) Set the operating permission of Local Configuration, Remote Configuration and Camera
Configuration for the user.
Local Configuration
Local Log Search: Searching and viewing logs and system information of device.
Local Parameters Settings: Configuring parameters, restoring factory default
parameters and importing/exporting configuration files.
Local Camera Management: Enabling and disabling analog camera (s). Adding,
deleting and editing of network camera (s). This function is supported by HDVR
series.
Local Advanced Operation: Operating HDD management (initializing HDD, setting
HDD property), upgrading system firmware.
Local Shutdown /Reboot: Shutting down or rebooting the device.
Remote Configuration
To Next Page
Loading...
Need help?
General
Weight and Dimensions
