Name: HIKVISION DS-7216HQHI-F2/N
Brand: HIKVISION
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Digital Video Recorder User Manual

2.6.3 Editing the Connected IP Camera

Purpose

After the adding of the IP cameras, the basic information of the camera is listed on the interface,

and you can configure the basic settings of the IP cameras.

Step 1 Click the icon to edit the parameters. You can edit the IP address, protocol and other

parameters.

Figure 2-42 Edit IP Camera

Channel Port: If the connected device is an encoding device with multiple channels, you can

choose the channel to connect by selecting the channel port No. in the dropdown list.

Step 2 Click OK to save the settings and exit from the editing interface.

Step 3 Drag the horizontal scroll bar to the right side and click the icon to edit the advanced

parameters.

Figure 2-43 Network Configuration of the Camera

Step 4 You can edit the network information and the password of the camera.

Other manuals for HIKVISION DS-7216HQHI-F2/N

Questions and Answers:

Need help?

Do you have a question about the HIKVISION DS-7216HQHI-F2/N and is the answer not in the manual?

General

Voltage	12 V
Certification	CE
Product color	White
Rack capacity	1U
Channels quantity	16 channels
Maximum frame rate	30 fps
Audio output channels	2.0 channels
Audio formats supported	G.711
Multi-display supported	Yes
Network connection type	RJ-45
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264
Playback resolutions supported	1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Video in	BNC
Video out	HDMI, VGA
Audio input	1x RCA
BNC input ports	16
USB 2.0 ports quantity	2
Number of users	128 user(s)
Ethernet interface type	Gigabit Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS
HDD interface	Serial ATA
Maximum HDD capacity	6000 GB
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Power requirements	DC
Power consumption (max)	30 W