HIKVISION DS-7600NI-K1 Series User Manual

Network Video Recorder User Manual
239
14.7 Checking HDD Status
Purpose:
You may check the status of the installed HDDs on NVR so as to take immediate check and
maintenance in case of HDD failure.
Checking HDD Status in HDD Information Interface
Step 1 Enter the HDD Information interface.
Menu > HDD>General
Step 2 Check the status of each HDD which is displayed on the list, as shown in Figure 14-25.
Figure 14-25 View HDD Status (1)
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or
Abnormal, please initialize the HDD before use. And if the HDD initialization is failed, please
replace it with a new one.
Checking HDD Status in HDD Information Interface
Step 3 Enter the System Information interface.
Menu >Maintenance > System Info
Step 4 Click the HDD tab to view the status of each HDD displayed on the list, as shown in Figure
14-26.

HIKVISION DS-7600NI-K1 Series Specifications

General

Category	Network Video Recorder
Max. Outgoing Bandwidth	80 Mbps
Decoding Format	H.265+/H.265/H.264+/H.264
USB Interface	2 × USB 2.0, 1 × USB 3.0
Operating Humidity	10% to 90% (non-condensing)
Model	DS-7600NI-K1
Video Output	1 × HDMI, 1 × VGA
HDMI Output Resolution	4K (3840 × 2160)
VGA Output Resolution	1920 × 1080
Recording Resolution	8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Playback Resolution	8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Hard Disk	SATA
Network Interface	1 × 10/100/1000 Mbps Ethernet
Power Supply	12 VDC
Consumption	≤ 10 W
Operating Temperature	-10 °C to +55 °C
Dimensions	315 × 240 × 48 mm (12.4 × 9.4 × 1.9 inch)