Network Video Recorder User Manual
53
Sort Channel Order
Go to Configuration → Camera → Camera. Refer to Sort Channel Order for details.
Configure Remote Settings
Go to Configuration → Camera → Camera. Refer to Configure Remote Settings for details.
Import/Export IP Camera Configuration File
The information of added network camera can be generated into an excel file and exported to the
local device for backup, including the IP address, port, password of admin, etc. And the exported
file can be edited on your computer, like adding or deleting the content, and copy the setting to
other devices by importing the excel file to it.
Before You Start
Connect a backup device, such as a USB flash drive, to your video recorder.
Steps
1. Go to Configuration → Camera → Camera.
2. Click More.
3. Click Export/Import to export/import configuration files to the connected backup device.
4. Set the storage device and folder path.
5. Click Export/Import.
What to do next
After the importing process is completed, you must restart the video recorder.
Advanced Settings
Steps
1. Go to Configuration → Camera → Camera → IP Channel.
2. Click More.
3. Configure the parameters as your desire.
H.265 Auto Switch Configuration
If you enable the option, video recorder will automatically switch to H.265 stream for the
network camera (which supports H.265 video format) for the initial access.
Upgrade
Upgrade the added network cameras.
Protocol
To connect the network cameras which are not configured with the standard protocols, you
can configure the customized protocols for them. The system provides 16 customized
To Next Page
Loading...
Need help?
General
