HIKVISION DS-8000 Series User Manual

User Manual of Embedded Net DVR
Page 25 Total 113
Each menu contains different kinds of items. There is a small rectangular frame named “Active
Frame” which is pointing to the selected item. This “Active Frame” can be moved by ÆorÅ
keys. There are such kinds of menu items:
a) Check Box: Provide 2 options, “9” means enable and “×” means disable. You can use
ENTERorEDITkey to switch over.
b) List Box: Provide more than 2 options. However, only one of them can be selected. You
can use↑and↓to select one option. For example, on the right side of “Select Camera”,
there is a list box for you to select one camera.
c) Edit Box: This is for you to input characters. PressEDITkey to enter into edit status,
you can input characters as following:
i. PressAkey to select number, upper case, lower case or symbols;
ii. UseÆandÅkeys to move cursor;
iii. UseEDITkey to delete the charcter in front of cursor;
iv. PressENTERorESCto exit edit.
d) Button: Excute a special function or enter into next sub-menu. For example, press
“Policy” button to enter into sub-menu. PressConfirmto save parameters and return to
parent menu. PressCancelbutton to cancel and return to parent menu. The button in
grey means it can be operated only after it is enabled.
How to exit menu
PressPREVkey to exit menu and return to preview mode.

HIKVISION DS-8000 Series Specifications

General

Brand	HIKVISION
Model	DS-8000 Series
Category	DVR
Language	English