User Manual of Embedded Net DVR
Page 19 Total 113
3.1.3 DS-8000HCI-CDRW/DS-8000HTI/HFI Front Panel
o p r q n
s t u
Index Type Name Description
1 IR receiver.
2 State
Lamps
1-8 Show channel 1-8 status. Green means recording; Red means
network transmission; Orange means recording and network
transmission. Lamp twinkle and red means the corresponding
HDD has error.
3 State
Lamps
9-16 Show channel 1-16 status. Green means recording; Red means
network transmission; Orange means recording and network
transmission.
4 POWER POWER Device switch with power indicator lamp. Green means DVR
is working; Red means DVR is powered off; No light means
no power is supplied.
5 State
Lamps
READY
STATUS
ALARM
MODEM
HDD
LINK
Tx/Rx
DVR is ready.
Green means you can use IR remote control.
Red means there is alarm.
Green means modem connection and dial-up successful.
Twinkle in red means reading or writing HDD.
Green means network is OK.
Twinkle in green means data is being transmitted.
6 Compound
Keys
MENU
ESC
PLAY
REC
1. Switch preview mode into menu;
2. Brush control short keyWIPER.
3. Press [MENU] for more than 5 seconds to cancel button
beep sound.
Cancel and back to parent menu.
1. Local playback;
2. AUTOin PTZ mode.
1. Manual record;
2. SHOTin PTZ mode (adjust preset).
To Next Page
Loading...
