User Manual of Embedded Net DVR
Page 92 Total 113
6.4 Hard Disk Management
Check HDD work status
Capacity, Free space, Stand by or not, Normal status or not.
Format HDD
Before formatting stop all recording. After formatting, you must reboot DVR, otherwise DVR
will not work normally.
6.5 Clear Alarm Out
Clear the alarm output manually.
6.6 Reboot
Reboot DVR.
6.7 Power Off
Shut down DVR.
6.8 View Log
To view the log recorded in DVR HDD.
In “Utilities” menu, press “View Log” to enter into “Log” menu:
To Next Page
Loading...
