User Manual of Embedded Net DVR
Page 45 Total 113
In the user name list box, only “admin” is existed. You can use→key, move “Active Frame”
to password edit box, and pressEDITkey to enter into edit status. Press numeric keys to input the
new password. The password is only combined by 16 numerals at most. After you finish inputting
password, pressENTERkey to exit. Move “Active Frame” to “Verify password” edit box, input
the verify password. Move “Active Frame” to “Confirm” button, and pressENTER, if password
and verify password are the same, the password will be saved and taken into effective.
If password and verify password are not same, a warning message box will be appeared.
In this case, pressENTERto return password edit box, and input new password again.