User Manual of Embedded Net DVR
Page 60 Total 113
effective.
Step 5: Setup alarm policy: You can select one or more response solutions, including “On
Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. You can
use ↑↓and EDITkey to enable or disable them. “×” is disable and “9” is enable.
Step 6: Save alarm setup: After your setup, press “Confirm” button and return “Image Setup”
interface. In “Image Setup” menu, press “Confirm” button to save current camera parameters and
return main menu.
Step 7: Save all cameras: If you want to setup other cameras, please repeat from step2 to step
6. In “Image Setup” menu, press “Confirm” key to save all cameras parameters. Press “Cancel”
button orESCkey to abort.
To Next Page
Loading...
